A plant can look healthy on a monthly generation report while losing energy to defects that only show up under the right test. Three methods, used together, give a far clearer picture.
IV-curve testing
Tracing the current-voltage curve of a string characterizes its electrical behaviour. Deviations from the expected shape help identify mismatch, shading, degradation, wiring faults and abnormal operating behaviour, and they point to where to look next.
Electroluminescence (EL)
EL imaging makes the cell structure visible, revealing micro-cracks, broken fingers and inactive areas that cannot be seen by eye. It is typically carried out with suitable equipment, mobile facilities or qualified service partners.
Drone thermography
A thermal survey across the array flags hotspots, inactive strings, bypass-diode anomalies and other temperature patterns. It covers large areas quickly and is ideal for deciding where detailed testing should focus.
Putting it together
Thermography finds the pattern, IV curves quantify the electrical effect and EL explains the cause at cell level. Combined with generation-data review and a performance-ratio assessment, the result is a defect register with risk classification and recommended actions instead of a hunch.
Standards worth knowing
Each method has a reference framework that helps make results comparable and repeatable:
- IEC TS 62446-3: outdoor infrared thermography of PV modules and plants in operation, including requirements for equipment, ambient conditions and inspection procedure
- IEC TS 60904-13: methods to capture electroluminescence images, derive quantitative metrics and interpret observed features
- IEC 61724-1: performance monitoring, the basis for performance-ratio assessment
Sources & further reading
This article is general information, not legal, regulatory or engineering advice for a specific project. Verify current regulations and standards before making commitments.